Shop Prices
| HEADS: Valve Job V8 | ||
| Street-Strip (3 angle) | $100.00 | |
| Street-Strip - (oversize valves) | $150.00 | |
| Competition - (ck cc’s & spring ht) | $150.00 | |
| Competition - (oversize valves) | $200.00 | |
| Valve Guides --- (bronze) | $100.00 | |
| Resurface Heads -- (pair) | $50.00 | |
| Resurface In Side of Head -- (pair) | $60.00 | |
| Hard Seat Rings -- (includes seat rings for 8 seats) | $125.00 | |
| Machine Spring Seats | $50.00 | |
| CYLINDER BLOCK: | ||
| Bore & Hone | $90.00 | |
| Bore & Hone W/Plates | $175.00 | |
| Hone | $50.00 | |
| Hone W/Plates | $125.00 | |
| Install Sleeve -- (each & includes sleeve) | $100.00 | |
| Install Cam Brgs | $35.00 | |
| Install Freeze & Oil Plugs | $10.00 | |
| Parallel Deck | $75.00 | |
| Align Hone Mains | $150.00 | |
| Line Bore Mains | Call for Price | |
| Oil Galley Tube (Sm block) | $100.00 | |
| Clearance Block for Stocker Crank | $75.00 | |
| CRANKSHAFT: | ||
| Grind | $90.00 | |
| Polish & Deburr oil holes | $35.00 | |
| Mag | $35.00 | |
| CLEANING: | ||
| Complete Engine | $80.00 | |
| Stripe & Boil block only | $60.00 | |
| Heads (each) | $10.00 | |
| Crankshaft | $10.00 | |
| Shot Peen Head (each) | $10.00 | |
| Mag Heads (each) | $10.00 | |
| Glass Bead Intake Manifold | $35.00 | |
| RODS & PISTONS: | ||
| Recondition (big end) | $90.00 | |
| Pin Fit & Align | $60.00 | |
| Replace Pin Bushings | $50.00 | |
| Float Pin on Rod | $60.00 | |
| Mag Rods | $50.00 | |
| Grind & Shot Peen | $120.00 | |
| Glass Bead Piston (Set | $32.00 | |
| Machine Top of Piston | $75.00 | |
| Fly Cut Valve Reliefs | Call for Price | |
| ENGINE BALANCING: | ||
| Complete Street | $150.00 | |
| Complete Race | $170.00 | |
| Crankshaft only | $90.00 | |
| ENGINE ASSEMBLY: | ||
| Short Block -- Degree Cam | $175.00 | |
| Long Block | $250.00 | |
| Complete | $350.00 | |
| AUTO TRANS: | ||
| Recond (w/o brake) | $150.00 | |
| Recond (w/brake) | $200.00 | |
| REAR END: | ||
| Recond & Set up Ring & Pinon | $150.00 | |